DOORBUSTER! Skempton Dining Table and Chairs (Set of 7)

It means the base finish has been intentionally distressed (worn in spots) so underlying color or wood shows through. It gives a subtle aged look rather than a flat, new surface. The contrast between the brown plank top and lighter base gives visual interest.

Skempton uses a blend of solid wood, engineered wood, and acacia veneers. The veneer over engineered parts helps control cost while giving wood-like aesthetics. While not full solid-wood everywhere, it’s a solid mid-tier construction typical in many quality mass-market dining sets.

Because the table is ~ 60" long and 36" wide, and chairs will extend further outward, you’ll want a dining space that gives adequate clearance — ideally at least 3 ft (≈ 90 cm) of walking room around all sides. Also consider the path of chairs when pulled back.

Six people — the 6 chairs included allow comfortable seating for standard family dinner use. The table shape (rectangular) means you don’t squeeze corners.

Some general cautions worth telling customers:

Distressed / rub-through finishes can accumulate chips or scuffs over time more visibly.

Veneer / engineered parts may be less forgiving of moisture / spills than solid wood.

Chairs may squeak or loosen with heavy use — periodic tightening might be needed.

Because it’s a mid-tier set, extreme abuse (kids skating under, heavy loads) may accelerate wear.

Delivery or parts mismatch can happen; customers should inspect all parts before assembly.

D394‑425 is commonly listed for the 7‑piece set.

It ships in parts and requires assembly by the buyer or professional installer.

The listings I found show the table top in a brown plank tone paired with a grayish-white, rub-through base. I did not see alternate finish SKUs for this set, though Ashley may allow regional variations.

Typical time in similar listings is ~ 90 minutes (for the set) when two people assemble.

Use coasters, place mats — avoid direct wet spills on the plank top or distressed areas.

Clean spills immediately with a damp (not wet) soft cloth; dry promptly.

Avoid harsh chemical cleaners or bleach; use products safe for wood / veneer surfaces.

Periodically tighten bolts / connectors.Protect from prolonged direct sunlight (which may fade the top or lighten the distressed base tones).

Avoid dragging heavy items across the surface to reduce scratch risk.